Order Online - Day or Night
800 652 9229
Shoping Basket
Menu
Spend £50.00 to qualify for free UK delivery

Kidde MAINS DIGITAL DISPLAYED CARBON MONOXIDE DETECTOR - 4MDCO

REF: 4MDCO

£37.50 ex. VAT
( £45.00 inc. VAT )

Kidde MAINS DIGITAL DISPLAYED CARBON MONOXIDE DETECTOR - 4MDCO

Quantity

5 Stars

(1 review)

Order before 2pm for next working day delivery*

The Kidde 4MDCO is a 230V mains Digital Dispalyed Carbon Monoxide Detector with sealed in lithium-ion battery back-up, ideal for major refurbishments in existing properties, projects requiring complete re-wiring or new build installations.

CO detectors are now a requirement by law and a landlords responsibility to have installed in all residential premises, warning against the deadly gas known as carbon monoxide and also providing a continuous monitoring of CO levels around the home.

CO detectors should be located on each level of the home, ideally close to fuel burning appliances and also sleeping areas.

The benefits of the digital peak level display are that it monitors and displays danger levels detected and can recall the highest levels detected.

Main sources of carbon monoxide are:

Clogged chimneys

Cracked or loose boiler flue

Improperly installed gas cooker, hob or hood

Corroded or disconnected water heater vent pipe

Gas or wood burning fireplaces

Portable paraffin or gas heaters

The 4MDCO can be linked up with 24 other Kidde and Firex mains devices (of which 18 can be initiating) including smoke, CO and heat alarms.

Key features of the 4MDCO are:

Sealed-in rechargeable lithium cell providing 7 years continuous operation in the event of a mains failure

Digital display - Providing early warning of intermittent and low CO levels - Clearly showing FIRE or CO when linked with other mains powered alarms

Peak level memory

End of life warning after 7 years from initial power up

Sensor - Electrochemical with de-ionised water electrolyte, sampling one every 15 seconds

Button test - Stimulates the effect of CO at the sensor, checking electronics & sounder

Audible / sound output - 85dB at 3 metres

Alarm response:

30PPM - no alarm within 120 minutes

50PPM - must alarm within 60-90 minutes

100PPM - must alarm within 10-40 minutes

300PPM - must alarm within 3 minutes

BSI certified to BS EN50291:2001

6 year warranty

Dimensions – (DIA) 147mm x (D) 42mm

Weight – 350g

** Replacement for the Kidde 423D/9HIR **

** Please note – That when replacing an existing Kidde fixture, all parts / accessories will need to be bought as new e.g. new alarm / new base plate **

Compatible with 23 Kidde modules: KF1, KF1R, KF2, KF2R, KF3, KF3R, KF10, KF10LL, KF10R, KF20, KF20LL, KF20R, KF30, KF30LL, KF30R, 4870, 4881, 4973, 4985, 4892, 4899, 1SFW, 1SFWR, 2SFW, 2SFWR, 3SFW, 3SFWR, 4MCO and 4MDCO.


MAINS POWERED DIGITAL DISPLAY CO DETECTOR - REPLACING KIDDE 423D/9HIR

The Kidde 4MDCO is a 230V mains Digital Dispalyed Carbon Monoxide Detector with sealed in lithium-ion battery back-up, ideal for major refurbishments in existing properties, projects requiring complete re-wiring or new build installations.

CO detectors are now a requirement by law and a landlords responsibility to have installed in all residential premises, warning against the deadly gas known as carbon monoxide and also providing a continuous monitoring of CO levels around the home.

CO detectors should be located on each level of the home, ideally close to fuel burning appliances and also sleeping areas.

The benefits of the digital peak level display are that it monitors and displays danger levels detected and can recall the highest levels detected.

Main sources of carbon monoxide are:

Clogged chimneys

Cracked or loose boiler flue

Improperly installed gas cooker, hob or hood

Corroded or disconnected water heater vent pipe

Gas or wood burning fireplaces

Portable paraffin or gas heaters

The 4MDCO can be linked up with 24 other Kidde and Firex mains devices (of which 18 can be initiating) including smoke, CO and heat alarms.

Key features of the 4MDCO are:

Sealed-in rechargeable lithium cell providing 7 years continuous operation in the event of a mains failure

Digital display - Providing early warning of intermittent and low CO levels - Clearly showing FIRE or CO when linked with other mains powered alarms

Peak level memory

End of life warning after 7 years from initial power up

Sensor - Electrochemical with de-ionised water electrolyte, sampling one every 15 seconds

Button test - Stimulates the effect of CO at the sensor, checking electronics & sounder

Audible / sound output - 85dB at 3 metres

Alarm response:

30PPM - no alarm within 120 minutes

50PPM - must alarm within 60-90 minutes

100PPM - must alarm within 10-40 minutes

300PPM - must alarm within 3 minutes

BSI certified to BS EN50291:2001

6 year warranty

Dimensions – (DIA) 147mm x (D) 42mm

Weight – 350g

** Replacement for the Kidde 423D/9HIR **

** Please note – That when replacing an existing Kidde fixture, all parts / accessories will need to be bought as new e.g. new alarm / new base plate **

Compatible with 23 Kidde modules: KF1, KF1R, KF2, KF2R, KF3, KF3R, KF10, KF10LL, KF10R, KF20, KF20LL, KF20R, KF30, KF30LL, KF30R, 4870, 4881, 4973, 4985, 4892, 4899, 1SFW, 1SFWR, 2SFW, 2SFWR, 3SFW, 3SFWR, 4MCO and 4MDCO.



Ask a question

Need to double check something about this product? Ask us a question




Customer Reviews from Feefo (1 reviews)

Posted Rating Comment
27-Sep-2015
4 Stars

Good
Good

* SUBJECT TO STOCK AVAILABILITY