ENATS 09-6 Telecoms Cable Screened 0.5mm² 20 pairs PVC SWA Black

Overview

Telecommunication cable is predominantly used in electrical instrumentation and communications. The cable is manufactured to specification ENATS 09-6 Section 4.5. (Electrical National Association and Technical specification). ENATS is the governing body who cover utilities specification cables.

Standards

• ENATS 09-6: Issue 8 Section 4.5
• Flame propagation to:
  IEC BS4066 PT1
  IEC 332 PT1

Construction

• Conductor: Solid Plain Annealed Copper Conductors
• Screen: Collective Aluminium / Mylar tape screen with 0.5mm² drain wire
• Insulation: Polyvinyl Chloride (PVC)
• Bedding: Polyvinyl Chloride (PVC)
• Armouring: Galvanised Steel Wire Armour
• Sheath: Polyvinyl Chloride (PVC)
• Sheath Colour: Black

Characteristics

• Temperature Limits: -20°C to +70°C
• Minimum Bending Radius: As per manufacturers datasheet

Should not be installed at temperatures below 0°C or above +40°C

Core IDs

• See datasheet PDF

Please note: If you require advice on which cable to use or how and where to install it, it is recommended that you consult a relevant qualified tradesperson. The Superlec Direct team are not qualified electricians.