Bendex 3 metre conduit is used to help guide cables and wiring around the home / site or work place.
Each length is manufactured from robust heavy gauge PVC which offers protection for the cable.
25mm conduit is available in either black or white.
This is an oversized item and will incur a one off surcharge of £4.17 (plus VAT) per order.
For surface mounting and containment of low voltage cabling
A range of moulded accessories facilitate both the mounting of and accommodation of direction changes & terminations.
May be bent with the use of the applicable size and type of bending spring (Green Tip)
Manufactured to the applicable requirements of BS EN 61386-1:2008
Conduit Systems for cable management – General requirements
PVC-u (Poly Vinyl Chloride – un-plasticised).
-5°C to +60°C (The product should not be exposed to the upper temperature limit for prolonged periods of time).
Non-flame propagating – under an applied flame the flame does not propagate & will extinguish itself once the applied flame is removed. Does not drip flaming particles.
Spread of Fire
To the requirements of BS EN 61386-1:2008
Vertical Burning Test (UL-94)
V-0 @ 1.6mm
Excellent resistance to many chemical
solutions including those of weak acids,
strong & weak alkalis, alcohols, aliphatic
hydrocarbons and is soluble or will swell in
Negligible. PVC-u is impervious to damp
conditions and will not corrode.
PVC-u is non-conductive and therefore will
not become live due to accidental contact
with live conductors. It has a typical
insulation resistance of more than 100MO
Vicat Softening Point – Raw Material (Please
also note operating temperature data
Co Efficient of Liner Expansion 7 x 10?5/m/°C
No specific hazards as the ingredients are
bound into the PVC-u matrix and are thus
rendered virtually insoluble. (See also Falcon
Product Safety Data Sheet)
REACH (Registration, Evaluation,
Authorisation & Restriction of Chemicals)
May contain SVHC – see product specific
REACH declaration for full details.
Standard Colour White and Black
Standard Length 3 Metres. Also available in other lengths on
HG20 – 20mm Outside Diameter x 1.7mm
HG25 – 25mm Outside Diameter x 1.9mm
Cross Sectional Area
HG20 - 216.4 mm²
HG25 - 353.0 mm²
Usable Cross-Sectional Area (45%)
HG20 – 97.4 mm²
HG25 - 158.8 mm
|Quantity||Price Inc. VAT||Price Ex. VAT|
|1 - 29||£3.12||£2.60|
|30 - 9999||£3.04||£2.53|