Hawke 501/453/UNIV Group II Cable Glands suitable for outdoor or indoor for use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables.
501/453/UNIV Glands are for particular use with cables that exhibit ‘Cold Flow’ characteristics.
Overview of the gland:
Flameproof, Increased safety, Dust Protection & Restricted Breathing
Class / Zones / Divisions
Certified ATEX / IECEx / c CSA us
Provides armour clamping using one clamping arrangement for all armour / braid types.
Provides a diaphragm seal on inner sheath of cable which will not damage cables that exhibit ‘Cold Flow’ characteristics.
Provides an outer deluge seal to prevent moisture ingress to the cable armour / braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.
Manufactured in brass
A gland specification:
Entry thread metric – M20²
Entry thread NPT – ¾” or ½”
Inner sheath – Min 8.4 / Max 14.3mm
Outer sheath – Min 12.5 / Max 20.5mm
Armour / Braid – Orientation 1 0.8 / 1.25 – Orientation 2 0.0 / 0.8
