DESCRIPTION
The Scolmore SB6IN1 6 in 1 Universal StudBox is a quick and easy mountable backbox that can be fixed directly onto the stud.
The StudBox features convenient points on its face that highlight the part of the plasterboard where the cut out should appear.
TECHNICAL SPECIFICATION
• 6in1 Universal StudBox
• 380 - 450mm centres
• 35mm deep cavities
• 1.8mm thick flanges so they are not noticeable once boarded over
INSTALL INSTRUCTIONS
• Studbox is 450mm long – use to measure and mark minimum height from floor on stud work
• Set Studbox at marked height, insert first screw, set level using spirit level, and insert second screw
• Push out tabs, insert cables into required box/boxes, and use snips to remove plaster board marking points from unused boxes
• Plasterer puts board in correct position, then bangs in area of Studbox
• Points on box’s face mark precise position to cut out of plaster board, no measuring required
• Studbox fits tight to back of board, significantly reducing noise and fire passage (working depth of 48mm)