Standard solar energy cable intended for the connection of solar panel arrays and similar equipment. Suitable for internal and external installations, fixed, or within conduit. Our solar energy cable is manufactured in accordance to BS EN 50618 and meets harmonised standard of H1Z2Z2-K.
Conductor: Electrolytic annealed flexible tinned copper conductor (class 5)
Insulation: Cross-linked halogen-free compound
Sheath: Cross-linked halogen-free compound
Sheath Colour: Black or Red
Nominal Voltage: 600V-1000V AC, 1800V DC
HCI Content: <0.5%
pH: >4.3
Conductivity: <10 IS/mm
Smoke Density: light transmittance >60%
Test Voltage: 6.5kV AC
Temperature Limits:
Ambient Temperature: -40 to 90°C
Maximum conductor temp: 120°C
Maximum short circuit temp: 250°C (max 5s)
Short Circuit temp: 250°C
Minimum Bending Radius: As per cable manufacturer datasheet
Should not be installed at temperatures below 0°C
For more information please consult a member of the Superlec Sales Team.
Please note: If you require advice on which cable to use or how and where to install it, it is recommended that you consult a relevant qualified tradesperson. The Superlec Direct team are not qualified electricians.
Superlec Code | SOLAR1X6RDR500/AD7 |
Colour | Red |
Conductor | 6mm² |
Stranding | 72/0.3 |
Weight | 86kg/km |
Diameter | 6.55mm |