Smart Click+ 100W 1 Gang Smart Switching Receiver CSP041
Technical Details
- Dimensions: 46mm (W) x 46mm (H) x 18mm (D)
- Working Voltage: 220-240V~ 50/60Hz
- Current Rating: 100W LED
- Terminal Size: 3mm x 2mm
- Terminal Torque: 0.2Nm
- Terminal Capacity: 4 x 0.75mm², 2 x 1.0mm², 1 x 2.5mm²
- Protocol: Zigbee
- Standby Current: 1mA
- Working Current: 10mA
- Working Humidity: 10%-90%RH
- Ingress Protection: IP20
- Back Box Depth: 35mm Minimum (47mm Flat Plate)
- Termination Type: Screw
- Operational Temperature: -10°C to +40°C
- Warranty: 2 Years
- Standards: BS EN 60669-2-1: 2004 +A12: 2010, BS EN 55035: 2017 +A11: 2020, BS EN 61000-3-2: 2014, BS EN 61000-3-3 : 2013 A1: 2019, BS EN 62311: 2008
Additional Information
- No neutral connection required
- Zigbee signal mesh
- Utilizes standard 230V switch wiring with permanent live required
- Voice control via ClickSmart+ Hub using Alexa and/or Google Home
Installation Overview
- No neutral connection is required.
- Utilizes standard on/off switches
- Utilizes standard switches and switch wiring
- Can be multi-way switch controlled along with control via the ClickSmart+ app
Programming Information
- With hub and app setup and receiver wired and powered, if not in pairing mode press the switch ‘On’ and ‘Off’ five times, the receiver LED will start flashing or the switch ‘On’ and ‘Off’ no longer operates to confirm in pairing mode. Can be paired with the hub via the app.