Overview
ENATS 90-6 Telecommunication cable is a PVC insulated, multipair, light current control cable which is intended to be used for feeder protection in control, alarm equipment and switchgear. The cable can also be used in power stations where the voltage does not exceed 150V d.c or 110V a.c. The cable can be installed where there is risk of mechanical impact due to the steel wired armouring.
Standards
- ENATS 09-6 issue 8 Section 5 3.6
- BS4066 Part 1
- IEC 332 Part 1
Construction
- Conductor: Solid tinned annealed copper conductors twisted to form pairs
- Insulation: PVC insulated
- Bedding: PVC bedding
- Armouring: Galvanised steel wire armour
- Sheath: PVC sheath
- Sheath Colour: Black
Characteristics
- Temperature Limits: -20°C to +70°C
- Minimum Bending Radius: As per cable manufacturer datasheet
Should not be installed at temperatures below 0°C
Core IDs
Please note: If you require advice on which cable to use or how and where to install it, it is recommended that you consult a relevant qualified tradesperson. The Superlec Direct team are not qualified electricians.
