Overview
ENATS 09-6 Telecommunication cable is a polythene insulated, multipair, light current control cable which is intended to be used for feeder protection in control, alarm equipment and switchgear. The cable can also be used in power stations where the voltage does not exceed 150V d.c or 110V a.c. The cable can be installed where there is risk of mechanical impact due to the steel wired armouring.
Standards
- ENATS 09-6 issue 8 table E2A/E2.B section 2 - induced voltage between the pairs up to 15kv
Construction
- Conductor: Solid plain annealed copper conductors
- Insulation: Polyethylene insulated
- Bedding: Polyethylene bedding
- Armouring: Galvanised steel wire armour
- Sheath: PVC sheath
- Sheath Colour: Black
Characteristics
- Temperature Limits: -20°C to +70°C
- Minimum Bending Radius: As per cable manufacturer datasheet
Should not be installed at temperatures below 0°C or above +40°C
Core IDs
Please note: If you require advice on which cable to use or how and where to install it, it is recommended that you consult a relevant qualified tradesperson. The Superlec Direct team are not qualified electricians.
