C-TEC ACTIV CONVENTIONAL HI-OUTPUT SOUNDER 100DB DEEP BASE - BF430C/CC/DR
The Activ Hi-Output range of conventional sounders and combined sounder visual alarm devices (VADs) are designed for use with C-TEC’s range of fire panels and other compatible third-party panels. However, compatibility testing with third-party panels is recommended to ensure correct operation. With a 100 dB(A) peak sound output @ 1 m, their purpose is to visually and audibly alert building occupants of a fire alarm. Units are supplied with either a shallow or deep base, in a red plastic enclosure.
The devices offer low current consumption, high sound output, 31 selectable primary tones with selectable secondary tone set and two selectable volume levels. Tones and volume levels are changed using the device’s 8-way DIP switch.
Key Features
- LPCB certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP33C rated
- Manufactured in the UK by C-TEC
Technical Specification
- Approvals/certifications: Certified to EN54-3 by the LPCB & VdS.
- Protocol/compatibility: Compatible with C-TEC's CFP, FP, MFP and EP203 conventional fire alarm panels and virtually all other makes (testing on third-party panels is recommended before use)
- Application/operation: Designed to be wall mounted. Can be used in covered outdoor areas.
- VAD category & coverage: N/A
- Flash rate & colour: N/A
- Supply/operating voltage: 18 to 30V DC.
- Nominal SPL (Sound Pressure Level): 100dB(A).
- Alarm current: At 30Vdc: 5.5mA; At 18Vdc: 3.8mA.
- Product dimensions (mm): 114mm diameter x 132mm deep.
- IP Rating: IP33C (Type B).
- Weight: 315g.
- Operating conditions/temperature: -10ºC to +55ºC. Max. 95% RH (Non-condensing).