Overview
Medium voltage power and distribution cable is used for supply networks. The low smoke halogen free construction makes this cable ideal for use in public buildings.
Please note: Red outer sheath can be prone to fading when exposed to U.V rays.
Standards
- BS7835
- Flame Propagation to BS EN 50265, BS EN 50266 (IEC 60332)
- Acid gas emission to BS EN 50267 (IEC60754)
- Smoke emission to BS EN 50268 (IEC61034)
Construction
- Conductor: Stranded Plain Annealed
- Compacted Circular Copper Conductor
- Insulation: Cross Link Polyethylene (XLPE)
- Metallic Screen: Individual or overall copper tape screen
- Separator: Copper Tape with 10% Overlap
- Bedding: LSZH
- Armouring: Aluminium Wire Armour
- Sheath: LSZH
- Sheath Colour: Red
Characteristics
- Voltage Rating: 6350/11000 Volts (12KV)
Tested to Voltage and Duration of BS 7835
- Temperature Limits: Up to 90°C
- Minimum Bending Radius: As per cable manufacturer datasheet
Should not be installed at temperatures below 0°C or above +40°C
Please note: If you require advice on which cable to use or how and where to install it, it is recommended that you consult a relevant qualified tradesperson. The Superlec Direct team are not qualified electricians.
