Danlers CESF PIR Ceiling Surface Mounted PIR Occupancy Switch White
The Danlers CESF PIR is a white square surface mount single channel PIR presence detector that can be installed onto solid ceilings using square surface mounting box (order code: PABO).
The PIR switch will switch on the connected load automatically when an area is occupied, and then switch it off when the area has been vacant for a chosen duration. It incorporate a passive infra-red sensor to detect movement of a warm body within its detection zone and a photocell to monitor the ambient light level and keep lights off when there is sufficient daylight available.
Offers a 360 degree detection zone and a 10 second to 40 minute adjustable time lag in 9 steps. This switch provides light when needed benefitting from reduced energy bills and automatic control.
It switches up to 6 amps (1500W) of resistive and fluorescent, 3 amps (750W) of electronic and wire wound transformer, 2 amps (500W) of CFL, 2D lamps, LED Drivers and LED lamps and fittings of maximum load and minimum load of 1 amp (250W) of fans.
Ideal for offices, factories, warehouses, canteens, schools and factories.
Danlers CESF PIR Features
* Danlers CESF PIR white square surface mounting single channel 360° | 7m PIR presence detector
* IP20 rated
* Surface mounting
* Can be installed directly onto solid ceilings using PABO mounting box
* Ideal for retrofitting or new build
* Product is hard wired
* Several PIR switches can be wired in parallel switches should be spaced every 5m in either direction
* Incorporate a passive infra-red sensor which detects the movement of a warm body moving
* Photocell to monitor the ambient light level
* Detection zone: 360°
* Detection range: up to 7m (5m strong detection and 2m secondary detection)
* Adjustable time lag range: 10 seconds to 40 minutes in 9 steps
* Adjustable photocell range: 30 to 1000 lux and inactive
* Loading: Up to 6 amps (1500W) of resistive, or fluorescent lighting loads or up to 1 amp (250W) of fans
* Up to 2 amps (500W) of low energy lighting loads (LED lamps and compact fluorescent)
* Dimensions: Height: 86mm | Width: 86mm | Proj: 22mm (excluding box)
| Quantity | Price Inc. VAT | Price Ex. VAT |
|---|---|---|
| 1 - 2 | £41.52 | £34.60 |
| 3 - 999 | £40.20 | £33.50 |
